|
Are you looking for:
|
RTR-505 TC Thermocouple Type (J,K,S,T)
RTR-505 Wireless Data Logger with Input Module
Depending on the type of Input Module that is included in the package purchased, the RTR-505 can measure and record different measurement items with a variety of sensors and measuring devices.
| --> | RTR-505-TC | | Temperature Measurement using a Thermocouple Sensor | | | RTR-505-Pt | | Temperature Measurement using a Pt100 or Pt1000 Sensor | | | RTR-505-V | | Voltage Measurement using a variety of Sensors | | | RTR-505-mA | | 4-20mA Measurement using a variety of Sensors | | | RTR-505-P | | Pulse Measurement using a variety of Sensors |
|
PB-5015 Encapsulated Thermistor Probe
An encapsulated thermistor probe for use with Tinytag data loggers.
This probe is a flexible, waterproof probe that can be supplied with 1.5, 3 or 10m cable lengths. FEATURES
- Waterproof (IP68 rated) design
- 1.5, 3 or 10m cable lengths available
- 45 second response time (in water)
|
TGPR-0800 OEM Current Input 0 to 20mA
OEM current input data logger.
A current input data logger that is supplied uncased so that it can be built into custom applications. The TGPR-0800 can be used to record the output from a number of industry standard 4-20mA sensors. Common applications include pressure and flow rate monitoring. FEATURES
- Reading Range 0 to 20mA
- Uncased for OEM
- 64,000 reading capacity
- Delayed start option
- 3 stop options
- 2 user-programmable alarms
- User-replaceable battery
- Free transfer function programming software
- USB or Serial download cables
YOU WILL ALSO NEED...
Software Tinytag Explorer, Windows software to configure, offload and analyse data from all Tinytags. The software is provided as a site licence and can be bundled with the appropriate download cable for your logger.
Connection
There are two cables available to download data from this logger. The preferred option, the CAB-0007-USB can connect to any of your computer's USB ports. If you have an older computer a CAB-0007 serial cable is also available.
OPTIONAL SERVICES
Calibration Optional UKAS traceable calibration certificates for this single channel data logger can be purchased, for more details visit Tinytag calibration.
SEE RELATED PRODUCTS BELOW
|
BP16 Strain Gauge Pressure Transducer
Micron BP16 Strain Gauge Pressure TransducerFeatures - Ranges 100psig to 15,000psig
- Stainless Steel Diaphragm (single piece construction)
- ¼” BSPP female pressure port (supplied as standard with bonded seal and ¼” male pressure port adaptor)
- 1000ohm bonded foil strain gauge bridge resistance as standard (option of 350ohm bridge available)
- Amplified voltage output version (refer to BP16UVW datasheet)
- Amplified current output version (refer to BP16EF datasheet)
- Supplied with 2 meter PVC cable (versions available with integral connector or modified cable lengths/type)
The Micron Meters range of Pioden Transducers has been widely used for many years.
The BP16 range of pressure transducers combine the excellent performance of bonded foil strain gauge technology with a single piece stainless steel diaphragm construction, to provide an excellent price/performance ratio, suitable for use in many arduous measurement applications.
The BP16 construction makes it ideal for a wide range of applications, including, hydraulic lifting, mobile hydraulic vehicles, portable test gear, air frame test rigs amongst others.
The most popular version of the BP16 is the integral cable version, which is supplied with a 1 meter PVC cable length. However, an integral connector version is also available, as are versions with different cable lengths or different cable types.
The BP16 offers a variety of amplified outputs in the same packaging arrangement (a separate data sheet is available detailing these).
Micron Meters can supply the BP16 on it's own or integrated with any of the wide range of strain gauge based instrumentation available from Micron Meters
|
ALA5- ATEX 4-20mA Load Cell Amplifier
ALA5- ATEX 4-20mA Load Cell AmplifierFeatures - High performance amplifier certified for ATEX Hazardous Zones 0, 1 & 2
- Designed for fitting in-line to strain gauge sensors such as load cells
- Intrinsically Safe to EN60079-11
- Environmentally sealed to IP67
- Provides 2-wire 4-20mA current loop output
- Fast calibration via gain and offset trim
- Bridge impedance min 350 Ohms max 5000 Ohms
- Wide temperature range -40C to +85C
- Supplied with 1m strain gauge cable and 5m output cable
- Robust design, reverse polarity & short circuit protected
- OEM option available
The ALA5 is an ATEX approved strain gauge/load cell amplifier designed for operation within hazardous zones 0,1 & 2. The high performance amplifier provides 2-wire 4-20mA current loop output and connects in-line for a range of signal conditioning for strain gauges, load cells, pressure and torque transducers. Intrinsically safe to EN60079-11 (previously EN 50020) standards.
|