|
Are you looking for:
|
Twisted Wires J series 36 AWG
TWISTED WIRE J Series 36 AWG 
Ultra Lightweight, Durable and Low-Cost are just a few of the reasons that this is one of our Top Selling Miniature Twisted Wire Products.
Strain Gages & Load Cells Hook-Up Wire Micro-Electronics Micro-Coils & Many More Applications |  | J SERIES - 36/7 AWG TWISTED WIRE CONSTRUCTION
CONDUCTOR: Silver Plated Soft Copper Core. 7 x 44 AWG
INSULATION: Teflon or Neoflon PFA. Diameter 0.30 mm
TWISTING: 8/12 x Diameter.
CHARACTERISTICS
CONTINUOUS SERVICE TEMPERATURE: -196 to +200° C
RATED VOLTAGE: 150 VAC
LINEAR RESISTANCE: 1.4 Ohm/m
CHEMICAL RESISTANCE: Excellent
WEATHERING RESISTANCE: Excellent
FLAMMABILITY RESISTANCE: Excellent
ROHS COMPLIANT
MISCELLANEOUS
Following ASTM B 298. NFC 93523. MIL W 16878 Extruded.
|  | |
Service Kits for Data Loggers
Service Kits for Gemini Tinytag Data Loggers.Service Kits for Tinytag data loggers that include batteries and everything else required to service a data logger. Each pack comes with full instructions on how to service a data logger
Kit Numbers and Descriptions are Listed Below.
|
Twisted Wires J series 34 AWG
TWISTED WIRE J Series 34 AWG 
Ultra Lightweight, Durable and Low-Cost are just a few of the reasons that this is one of our Top Selling Miniature Twisted Wire Products.
Strain Gages & Load Cells Hook-Up Wire Micro-Electronics Micro-Coils & Many More Applications | | J SERIES - 34/7 AWG TWISTED WIRE CONSTRUCTION
CONDUCTOR: Silver Plated Soft Copper Core. 7 x 42 AWG
INSULATION: Teflon or Neoflon PFA. Diameter 0.37 mm
TWISTING: 8/10 x Diameter.
CHARACTERISTICS
CONTINUOUS SERVICE TEMPERATURE: -196 to +200° C
RATED VOLTAGE: 150 VAC
LINEAR RESISTANCE: 1.0 Ohm/m
CHEMICAL RESISTANCE: Excellent
WEATHERING RESISTANCE: Excellent
FLAMMABILITY RESISTANCE: Excellent
ROHS COMPLIANT
MISCELLANEOUS
Following ASTM B 298. NFC 93523. MIL W 16878 Extruded.
|  | |
SGA A/D Strain Gage Amplifier
Strain Amplifier / Signal Conditioner
PCB (SGA A&D pcb)Features - Strain gauge amplifier for signal conditioning of load cells
- Bridge excitation of 10V DC with drive for 4 load cells
- Selectable bandwidth of 1 to 5000 Hz for test & measurement applications
- Selectable sensitivity from 0.1 to 30 mV/V using switches and fine trim potentiometer
- Switch selectable offset ±70% FS using switches and fine trim potentiometer
- User selectable analogue output in standard voltage or current format
- The SGA/A & D pcb board (as shown in main photo) with mains transformer fitted for AC and DC supplies
- Photo on left shows the cased version of the SGA/A & D
The SGA Strain Gauge Amplifier is a high performance signal conditioner for single or multiple strain gauge bridge sensors such as load, force, pressure and torque. The SGA offers a wide bandwidth and a wide input signal range. The device can be powered from AC or DC supplies providing excitation for up to 4 x 350 ohm strain gauge bridges. The conditioned output signal can be selected from 0-20mA, 4-20mA, 0-10V, 0-5V, ±5V or ±10V. Options include. Isolated DC supply, DIN rail mount and OEM module.
The SGA Strain Gauge Amplifier is supplied in a waterproof IP65 NEMA4 bulkhead mountable case and is available with AC or DC power supply options. Robust and fully CE compliant.
For a digital version with set point relays, communications and display options please see our Load Cell Amplifier Model LCA15. |
Twisted Wires J series 32 AWG
TWISTED WIRE J Series 32 AWG 
Ultra Lightweight, Durable and Low-Cost are just a few of the reasons that this is one of our Top Selling Miniature Twisted Wire Products.
Strain Gages & Load Cells Hook-Up Wire Micro-Electronics Micro-Coils & Many More Applications | | J SERIES - 34/7 AWG TWISTED WIRE CONSTRUCTION
CONDUCTOR: Silver Plated Soft Copper- Core 19 x 44 AWG.
INSULATION: Teflon or Neoflon PFA- Diameter 0.49 mm.
TWISTING: 8 x Diameter
CHARACTERISTICS
CONTINUOUS TEMP: -196 to +200° C
RATED VOLTAGE: 250 VAC
LINEAR RESISTANCE: 0.5 Ohm/m
CHEMICAL RESISTANCE: Excellent
WEATHERING RESISTANCE: Excellent
FLAMMABILITY RESISTANCE: Excellent
ROHS COMPLIANT
MISCELLANEOUS
Following ASTM B 298. NFC 93523. MIL W 16878 Extruded.
|  | |