| |
- Micron Pressure Solutions
- Pressure Transducers
- Pressure Transmitters
- Pressure Monitors
Micron Meters offers a wide range of standard and custom design Pressure Measurement products. We have categorized our range to enable our customers to find their product of choice quickly.
The categories we have broken our load cell products into for this web site include:
- Pressure Transducers (wity mV/V output)
- Pressure Transmitters (with Current & Voltage output)
Click on the Product Tabs Above to navigate to specific feature on the product and any associated manuals, applications notes and datasheets for that product. |
|
Micron Meters
800-831-2522 or 770-923-2522
|
PRESSURE TRANSDUCERS |
|
|
|
BP16 Strain Gauge Pressure Transducer
|
|
- Ranges 100psig to 15,000psig
- Stainless Steel Diaphragm (single piece construction)
- ¼” BSPP female pressure port (supplied as standard with bonded seal and ¼” male pressure port adaptor)
- 1000ohm bonded foil strain gauge bridge resistance as standard (option of 350ohm bridge available)
- Amplified voltage output version (refer to BP16UVW datasheet)
- Amplified current output version (refer to BP16EF datasheet)
- Supplied with 2 meter PVC cable (versions available with integral connector or modified cable lengths/type)
The Micron Meters range of Pioden Transducers has been widely used for many years.
The BP16 range of pressure transducers combine the excellent performance of bonded foil strain gauge technology with a single piece stainless steel diaphragm construction, to provide an excellent price/performance ratio, suitable for use in many arduous measurement applications.
The BP16 construction makes it ideal for a wide range of applications, including, hydraulic lifting, mobile hydraulic vehicles, portable test gear, air frame test rigs amongst others.
The most popular version of the BP16 is the integral cable version, which is supplied with a 1 meter PVC cable length. However, an integral connector version is also available, as are versions with different cable lengths or different cable types.
The BP16 offers a variety of amplified outputs in the same packaging arrangement (a separate data sheet is available detailing these).
Micron Meters can supply the BP16 on it's own or integrated with any of the wide range of strain gauge based instrumentation available from Micron Meters |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Pressure Range (FSO) |
100, 150, 200, 500, 1000, 2000, 3000, 5000, 10000, 15000 psig |
| Overpressure Range |
200% with < ±1% calibration shiftxxx(125% for 15,000psi version) |
| Burst Pressure |
400% (200% for 15,000psi version) |
| Output Sensitivity |
2mV/V nominally |
| Zero Offset |
< ±4% FSO |
| Accuracy |
< ±0.1% FSO (±0.7% for 100-200psi versions) |
| Repeatability |
< ±0.1% FSO |
| Bridge resistance |
1000ohm standard (350ohm optional) |
| Insulation Resistance |
> 1000Mohm at 250vdc |
| Operating Temperature Range |
-20°C to +70°C |
| Compensated Temperature Range |
+10°C to +60°C |
| Zero Temperature Coefficient |
< ±0.03% FSO/°C (<±0.01% FSO/°C optional) |
| Span Temperature Coefficient |
< ±0.03% FSO/°C (<±0.01% FSO/°C optional) |
| Environmental Protection Level |
IP66 |
| Connection Type |
2 meters 4-core screened PVC cable, orxxx4 pin Lumberg connector (c/w 5m PUR cable) |
| Wiring Connections |
| +ve supply Red (Pin 1) |
-ve supply Blue (Pin 2) |
| +ve signal Green (Pin 3) |
-ve signal Yellow (Pin 4) |
|
| Options Available |
Consult Factory - Many Options and special versions available |
 BP16 Data Sheet
- SGA Strain Gauge Analogue Amplifier
- ADW15 Panel Mounting Strain Gauge Input Indicator/Controller
|
There are currently no options available to view from this page. To view the various options which may be available for the BP16, please view the BP16 product datasheet
Alternatively, if you require a Pressure Transmitter with a Current output, or for a Voltage output. |
- On-board vehicle weighing
- Earthmoving vehicle hydraulic system protection/weighing
- Portable hydraulic test sets
- Air frame test rigs
- Hydraulic system feedback control
|
|
BP70 High Range Pressure Transducer
|
|
- Ranges 1000, 2000, 3000 bar
- Stainless Steel single piece diaphragm
- ½” BSPP male pressure port
- High insulation resistance, making it suitable for intrinsically safe applications
- 1000ohm bridge resistance
- Cable gland or integral connector output versions available.
The Micron Meters range of Pioden Transducers has been widely used for many years.
The BP70 has been specifically developed for high pressure applications, where a robust and accurate sensor is required. The accuracy achieved with the BP70 and the high quality that comes as standard with Micron Meters products makes it the first choice for many applications.
The BP70 can be further enhanced to meet your specific application requirements with any one of the many options that are available, including improved temperature compensation or matched outputs.
Micron Meters can also supply the BP70 with any one of the many instruments in our range, offering a complete integrated instrumentation package from a single source. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Pressure Range (FSO) |
1000, 2000, 3000bar |
| Overpressure Range |
150% (110% for 3000bar version) |
| Burst Pressure |
5400bar |
| Output Sensitivity |
2000bar = 1mV/V
1000bar = 0.5mV/ V
3000bar = 1.5mV/V |
| Zero Offset |
< ±0.01mV/V |
| Accuracy |
< ±0.25%FSO |
| Repeatability |
< ±0.1% FSO |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
1000ohms |
| Operating Temperature Range |
-20°C to +70°C |
| Compensated Temperature Range |
+10°C to +70°C |
| Zero Temperature Coefficient |
< ±0.01%FSO/°C |
| Span Temperature Coefficient |
< ±0.01%FSO/°C |
| Environmental Protection Level |
IP67 (cable version), IP66 (connector version) |
| Connection Type |
Cable version 3m PUR 4-core
Connector version MIL-26482 |
| Pressure Port |
½†BSPP male |
| Options Available |
1000Mohm @ 1000vdc insulation resistance
< ±0.005@FSO Temperature Coefficient
Output standardized to <±0.2% |
BP70 Data Sheet
- SGA Strain Gauge Analogue Amplifier
- ADW15 Panel Mounting Strain Gauge Input Indicator/Controller
|
There are currently no options available to view from this page. To view the various options which may be available for the BP70, please view the BP70 product datasheet
- Engine test stand
- Brake testing
- Pipeline Instrumentation
- Water Jets (cleaning & blasting)
- Hydraulic Control Systems
|
|
UP1 Ultra Low Range Pressure Transducer
|
|
- Range 10"WG (25mbar/0.36psi)
- Robust Housing
- Standard Wheatstone Bridge Output
- 700ohm bridge resistance
- Differential or Gauge versions
- Integral MIL-26482 Connector
The UP series pressure transducers are well proven and widely specified for monitoring pressure in process control systems, filter efficiency monitoring and pressure measurement.
When used in differential mode, the medium on the case side should be dry gas or non-conductive liquid.
Micron Meters are able to offer the UP1 with a wide range of instrumentation products, to offer a complete system. Please contact our technical department to discuss your instrumentation requirements. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Range (FSO) |
±10†W.G (±25 mbar or ±0.36 psi) |
| Maximum Overload Range |
110% FSO |
| Maximum Port Line Pressure |
100psi (with a differential pressure not exceeding 0.36psi) |
| Output Sensitivity |
4mV/V nominally |
| Zero Offset |
< ±2% FSO |
| Accuracy |
< ±0.5% FSO |
| Repeatability |
< ±0.2% FSO |
| Excitation Voltage |
10vdc maximum (5Vdc recommended) |
| Bridge Resistance |
700ohm |
| Insulation Resistance |
> 100Mohm at 50vdc |
| Operating Temperature Range |
-30°C to +100°C |
| Compensated Temperature Range |
+10°C to +60°C |
| Zero Temperature Coefficient |
< ±0.05% FSO/°C |
| Span Temperature Coefficient |
< ±0.05% FSO/°C |
| Environmental Protection Level |
IP66 |
| Connection Type |
Integral MIL-C-26482 Bayonet Lock Connector |
| Wiring Connections |
| Pin A |
Positive Signal |
| Pin B |
Positive Excitation |
| Pin C |
Negative Signal |
| Pin D |
Negative Excitation |
|
Content 2
UP1 Data Sheet
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- TR150 Battery Powered Handheld Portable Indicator
- ADW15 Panel Mounting Load Cell Indicator/Controller
|
There are currently no options available to view from this page. To view the various options which may be available for the UP1, please view the UP1 product datasheet
- Filter condition monitoring
- Air flow simulation systems
|
|
PRESSURE TRANSMITTERS |
|
|
BP16EF Current Output Pressure Transmitter
|
|
- Ranges 100psig to 15,000psig
- Stainless Steel Diaphragm (single piece construction)
- ¼” BSPP female pressure port (supplied as standard with bonded seal and ¼” male pressure port adaptor)
- 2-wire or 3-wire 4-20mA Output
- mV/V Wheatstone Bridge version available (refer to BP16 datasheet)
- Amplified voltage output version available (refer to BP16UVW datasheet)
- Supplied with 2 meter PVC cable (versions available with integral connector or modified cable lengths/type)
The BP16EF range of pressure transmitters combine the excellent performance of bonded foil strain gauge technology with a single piece stainless steel diaphragm construction, to provide an excellent price/performance ratio, suitable for use in many arduous measurement applications, with integral signal conditioning, providing an amplified current output.
The BP16EF construction makes it ideal for a wide range of applications, including, hydraulic lifting, mobile hydraulic vehicles, portable test gear, air frame test rigs amongst others.
The most popular version of the BP16EF is the integral cable version, which is supplied with a 2 meter PVC cable length. However, an integral connector version is also available, as are versions with different cable lengths or different cable types.
The BP16 family of products offers a variety of output formats, please refer to the BP16 and BP16UVW datasheets.
Micron Meters can supply the BP16 on it's own or integrated with any of the wide range of instrumentation available from Micron Meters |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Pressure Range (FSO) |
100, 150, 200, 500, 1000, 2000, 3000, 5000, 10000, 15000 psig |
| Overpressure Range |
200% with < ±1% calibration shift
(125% for 15,000psi version |
| Burst Pressure |
400% (200% for 15,000psi version) |
| Output Signal |
BP16E 2-wire 4-20mA (16mA span, ±0.1%tolerance)
BP16F 3-wire 4-20mA (16mA span, ±0.1% tolerance) |
| Zero Offset |
< ±1% FSO |
| Accuracy |
< ±0.1% FSO (±0.7% for 100-200psi versions) |
| Repeatability |
< ±0.1% FSO |
| Supply Voltage |
BP16E 9Vdc to 30Vdc
BP16F 10Vdc to 30Vdc |
| Maximum Output Load |
BP16E 800ohm at 30Vdc
BP16F 250ohm at 30Vdc |
| Operating Temperature Range |
-20°C to +70°C |
| Compensated Temperature Range |
+10°C to +60°C |
| Zero Temperature Coefficient |
< ±0.03% FSO/°C (<±0.01% FSO/°C optional) |
| Span Temperature Coefficient |
< ±0.03% FSO/°C (<±0.01% FSO/°C optional) |
| Environmental Protection Level |
IP66 |
| Connection Type |
2 meters 4-core screened PVC cable, or
4 pin Lumberg connector (c/w 5m PUR cable). |
| Options Available |
Consult Factory
Many Options and special versions available |
BP16EF Datasheet
- ADP15 Process Input Panel Mounting Indicator/Controller
- ADP15 Dual Input Panel Mounting Indicator/Controller
There are currently no options available to view from this page. To view the various options which may be available for the BP16EF, please view the BP16EF product datasheet
Alternatively, if you require a Pressure Transmitter with a Voltage output or for a Strain Gauge output give us a call.
- On-board vehicle weighing
- Earthmoving vehicle hydraulic system protection/weighing
- Portable hydraulic test sets
- Air frame test rigs
- Hydraulic system feedback control
|
BP16UVW Voltage Output Pressure Transmitter
|
|
- Ranges 100psig to 15,000psig
- Stainless Steel Diaphragm (single piece construction)
- ¼” BSPP female pressure port (supplied as standard with bonded seal and ¼” male pressure port adaptor)
- 3-wire 0-5V or 0-10V or 4-wire ±10V Output
- mV/V Wheatstone Bridge version available (refer to BP16 datasheet)
- Amplified current output version available (refer to BP16EF datasheet)
- Supplied with 2 meter PVC cable (versions available with integral connector or modified cable lengths/type)
The Micron Meters range of Pioden Transmitters has been widely used for many years.
The BP16UVW range of pressure transmitters combine the excellent performance of bonded foil strain gauge technology with a single piece stainless steel diaphragm construction, to provide an excellent price/performance ratio, suitable for use in many arduous measurement applications, with integral signal conditioning, providing an amplified voltage output.
The BP16UVW construction makes it ideal for a wide range of applications, including, hydraulic lifting, mobile hydraulic vehicles, portable test gear, air frame test rigs amongst others.
The most popular version of the BP16UVW is the integral cable version, which is supplied with a 2 meter PVC cable length. However, an integral connector version is also available, as are versions with different cable lengths or different cable types.
The BP16 family of products offers a variety of output formats (please refer to the BP16 and BP16EF datasheets).
Micron Meters can supply the BP16 on its own or integrated with any of the wide range of instrumentation available from LCM Systems |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Pressure Range (FSO) |
100, 150, 200, 500, 1000, 2000, 3000, 5000, 10000, 15000 psig |
| Overpressure Range |
200% with <±1% calibration shift
(125% for 15,000psi version) |
| Burst Pressure 400% (200% for 15,000psi version) |
undefined |
| Output Signal |
BP16U - 3-wire 0volt (5V span, ±0.1% tolerance)
BP16V - 3-wire 0-10 volt(10V span, ±0.1% tolerance)
BP16W - 4-wire 0-10 volt(10V span, ±0.1% tolerance) |
| Zero Offset |
< ±1% FSO |
| Accuracy |
< ±0.1% FSO (±0.7% for 100-200psi versions) |
| Repeatability |
< ±0.1% FSO |
|
BP16U - 8.5Vdc to 28Vdc Supply Voltage |
| Minimum Output Load |
BP16U - 5000ohm
BP16V - 5000ohm
BP16W - 5000ohm |
| Operating Temperature Range |
-20°C to +70°C |
| Compensated Temperature Range |
+10°C to +60°C |
| Zero Temperature Coefficient |
<±0.03% FSO/°C (<±0.01% FSO/°C optional) |
| Span Temperature Coefficient |
<±0.03% FSO/°C (<±0.01% FSO/°C optional) |
| Environmental Protection Level |
IP66 |
| Connection Type |
2 meters 4-core screened PVC cable, or
4 pin Lumberg connector (c/w 5m PUR cable) |
| Options Available |
Consult Factory  - Many Options and special versions available |
BP16UVW Datasheet
- ADP15 Process Input Panel Mounting Indicator/Controller
- ADP15 Dual Input Panel Mounting Indicator/Controller
There are currently no options available to view from this page. To view the various options which may be available for the BP16UVW, please view the BP16UVW product datasheet
Alternatively, if you require a Pressure Transmitter with a Current output, or a Strain Gauge output give us a call.
- On-board vehicle weighing
- Earthmoving vehicle hydraulic system protection/weighing
- Portable hydraulic test sets
- Air frame test rigs
- Hydraulic system feedback control
|
|
|
|
|
|
| |
| Industry Partners |
|
|
About Micron Meters |
 |
|
|
 |
| Micron Instruments located in Simi Valley, California, is a leading manufacturer and supplier of High-Quality Semiconductor Strain Gages, Pressure Transducers, Temperature Sensors and Measuring Systems. |
|
|
Micron Meters offers a wide range of Products for Measuring and Recording Environmental and Physical Conditions. Telemetry Based Strain Gage Readers, Data Loggers, Panel Meters, Load and Pressure devices are just a few of our unique products. |
| |
|
| Contact Information |
| Micron Meters |
East |
Phone: |
770.923.2522 |
| |
800.831.2522 |
| |
|
| Micron Meters |
West |
Phone: |
435.251.8106 |
Fax: |
435.251.8107 |
| |
|
| |
|
|
|
