| |
- Tension Load Cells
- DCE
- DIA
- PTC-1
- TCA
- More...
Micron Meters offers a wide range of standard and custom design load cell products. We have categorized our range to enable our customers to find their product of choice quickly.
The categories we have broken our load cell products into for this web site include:
The product list below is for TENSION LOAD CELL Products.
Click on the product tabs above to navigate to specific feature on the product and any associated manuals, applications notes and datasheets for that product. |
|
DCE Stainless Steel Stud Type Tension and Compression Load Cell |
|
- Ranges 100N to 50kN
- Stainless Steel construction
- Environmentally Sealed to IP65
- Special Sizes and ranges available
- Different mounting options available
- Rationalized Output Option Available
The Micron Meters DCE load cell has been developed for applications that require the measurement of tensile and compressive forces, where space is limited.
As with most Micron products there a special variants that are available for this product. Popular variants include different thread sizes, integral connectors and high temperature versions.
The DCE can be supplied on it's own or integrated with any of the wide range of instrumentation products available from Micron Systems.
Typical applications include component testing, weighing systems. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load |
100, 250, 500, 750N
1, 2.5, 5, 7.5, 10, 25, 50kN |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Maximum Side Load |
10% of Rated Load |
| Output |
1.5 mV/V at Rated Load (nominal) |
| Non-Linearity |
< ±0.25% of Rated Load |
| Non-Repeatability |
< ±0.10% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350ohm |
| Insulation Resistance |
> 500Mohm @ 500vdc |
| Operating Temperature Range |
-20 to +70°C |
| Compensated Temperature Range |
-10 to +50°C |
| Zero Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Environmental Protection Level |
IP65 |
| Connection Type |
2 meters 4-core screened PVC cable |
| Wiring Connections |
| Red +ve supply |
Blue -ve supply |
| Green +ve signal |
Yellow -ve signal |
|
| Connection Type |
Special ranges and sizes available
Rationalized output available |
 DCE Data Sheet
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- TR150 Battery Powered Handheld Portable Indicator
- ADW15 Panel Mounting Load Cell Indicator/Controller
|
There are currently no options available to view from this page.
To view the various options which may be available for the DCE, please view the DCE product datasheet.
- General Force Measurement
- Wire Tension Measurement
- Tensile Testing
|
|
DIA Stainless Steel Diaphragm Load Cell |
|
- Ranges 10 kg to 2000 kg
- Stainless steel construction
- Environmentally sealed to IP65 (IP67 can also be offered)
- Special sizes and ranges available
- Different mounting options available
- Integral connector versions available
The micron series of Diaphragm Load Cells have been designed for use in a wide selection of different applications, particularly where there are low height constraints, for load cell installation.
The flexibility in the design of the DIA series enables the customer to virtually design the load cell to suit their installation exactly. Our engineers are on hand to assist you with this. Some of the standard variations that we offer include: male or female center threads, clear center holes etc.
The DIA series can be supplied as shown in this datasheet or can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated.
The DIA series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system. |
|
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (kgf) |
10, 25, 50, 150, 250, 500, 1000, 2000 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
1.5 mV/V at Rated Load (nominal) |
| Non-Linearity |
< ±0.25% of Rated Load (typically) |
| Non-Repeatability |
< ±0.10% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350ohm |
| Insulation Resistance |
> 500Mohm @ 500vdc |
| Operating Temperature Range |
-20 to +70°C |
| Compensated Temperature Range |
-10 to +50°C |
| Zero Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Environmental Protection Level |
IP65 (IP67 optional) |
| Connection Type |
2 meters 4-core screened PUR cable |
| Wiring Connections |
| Red +ve supply |
Blue -ve supply |
| Green +ve signal |
Yellow -ve signal |
|
| Connection Type |
Special ranges and sizes available
Special mounting options
Special electrical connections |
DIA Data Sheet
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- TR150 Battery Powered Handheld Portable Indicator
- ADW15 Panel Mounting Load Cell Indicator/Controller
|
There are currently no options available to view from this page.
To view the various options which may be available for the DIA, please view the DIA product datasheet. |
- Process Measurement & Control
- Automotive Testing
- Low profile weighing systems
|
|
PTC-1 Stainless Steel Low Profile Universal Load Cell |
|
- Ranges 5 to 1000kN
- Stainless Steel construction
- Environmentally Sealed to IP66
- Low Profile
- High Natural Frequency
- High Thermal Stability
The PTC-1 series load cells are based on the conventional low profile or pancake load cell principle. The internal construction is a shear web design, offering high natural frequency, low deflection and excellent resistance to side and torsion forces.
The PTC-1 is constructed from stainless steel offering excellent corrosion resistance. There is an optional mounting base available, which is required if the load cell is to be used in tension. The mounting base is also constructed from stainless steel.
The standard load cell is supplied with an integral MIL spec. connector and supplied with a mating connector.
The PTC-1 is ideally suited to many testing applications, where high stability and low height are essential requirements.
The PTC-1 can be supplied with any of Micron Meters range of load cell instrumentation, and can be supplied calibrated as a complete ready to go system.
Please consult our technical department for any technical advice required on this product or the interfacing with our instrumentation. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (FSO) |
5, 10, 25, 50, 100, 200, 300, 500, 750, 1000kN |
| Overload Range |
150% FSO |
| Ultimate Breaking Load |
> 300% FSO |
| Maximum Transverse Load |
100% FSO |
| Maximum Permissible Dynamic Load |
75% FSO (through center thread only) |
| Output |
2mV/V (±0.1%) |
| Zero Balance |
0.02mV/V |
| Non-Linearity |
±0.05% FSO |
| Hysteresis |
≤±0.05% FSO |
| Non-Repeatability |
≤±0.03% FSO |
| Transverse Load Effect (at 10% FSO) |
≤±0.03% FSO |
| Excitation Voltage |
10vdc recommended (18vdc maximum) |
| Input Resistance |
800ohm (5kN to 500kN), 430ohm (750kN to 1000kN) |
| Output Resistance |
705ohm (5kN to 500kN), 352ohm (750kN to 1000kN) |
| Insulation Resistance |
> 5Gohm@ 50vdc |
| Compensated Temperature Range |
-10 to +40 °C |
| Operating Temperature Range |
-10 to +70 °C |
| Storage Temperature Range |
-20 to +80 °C |
| Zero Temperature Coefficient |
≤±0.003% FSO/°C |
| Span Temperature Coefficient |
≤±0.003% FSO/°C |
| Deflection at Rated Load |
0.06mm (5kN to 25kN), 0.09mm (50kN to 100kN)
0.17mm (200kN to 300kN), 0.17mm (500kN)
0.23mm (750kN to 1000kN) |
| Environmental Protection Level |
IP66 |
| Weight (load cell only) |
1.60kg (5kN to 25kN), 2.45kg (50kN to 100kN)
5.80kg (200kN to 300kN), 6.80kg (500kN)
6.5kg (750kN to 1000kN) |
PTC-1 Data Sheet
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- TR150 Battery Powered Handheld Portable Indicator
- ADW15 Panel Mounting Load Cell Indicator/Controller
|
The following standard options are available:-
Mounting Base (Option MB)
Load Cap Assembly (Option LC)
Please see below for dimension and drawing of each option. Other options may also be available. Please contact Micron Meters technical department to discuss your requirements.
|
|
- Structural Testing
- Jack Load monitoring
- Airframe Testing
- Material Test Machine Feedback
- Fatigue Testing Rigs
|
|
TCA Stainless Steel Tension and Compression Load Cell |
|
- Ranges from 1tonne to 100tonne
- Stainless Steel construction.
- Environmentally Sealed to IP66 (IP67 and submersible versions can also be offered)
- Designed to fit standard metric rod-end bearing sizes.
- Special Sizes and ranges available.
- Can be supplied with imperial threads & male or male/female end threads.
- Can be supplied complete with mating spherical rod-end bearings.
The TCA series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearing.
There is great flexibility in the TCA design, allowing us to offer special sizes, to meet specific application requirements, or different end thread sizes/combinations. There are versions available with male threads at each end, or male threads one end, female the other. We are also happy to supply any of the TCA series with imperial thread sizes.
The TCA series can be supplied as shown in this datasheet or can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated. The TCA series can be supplied on it’s own or combined with our extensive range of instrumentation to provide a complete load monitoring system |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (tonne) |
1, 2, 3, 5, 7.5, 10, 20, 30, 50, 75, 100 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
1.5 mV/V at Rated Load (±10%) |
| Accuracy |
< ±0.20% of Rated Load |
| Non-Repeatability |
< ±0.10% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350ohm, (700ohm for ranges above 30tonne) |
| Insulation Resistance |
> 500Mohm @ 500vdc |
| Operating Temperature Range |
-20 to +70°C |
| Compensated Temperature Range |
-10 to +50°C |
| Zero Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Environmental Protection Level |
IP66 (IP67 optional) |
| Connection Type |
Integrated bayonet lock connector, supplied with 5 meter mating cable assembly |
| Wiring Connections |
| Red |
+ve supply |
Blue |
-ve supply |
| Green |
+ve signal |
Yellow |
-ve signal |
|
| Options Available |
Special ranges and sizes available
Different thread arrangements
Special electrical connections
Submersible versions available
Supply with spherical rod-end bearingsy |
TCA Data Sheet
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- TR150 Battery Powered Handheld Portable Indicator
- ADW15 Panel Mounting Load Cell Indicator/Controller
|
- The TCA can be offered with the following options:- Integral Amplifier, providing direct voltage or current output, using ICA range of products.
- Integral Amplifier, providing direct RS485 digital communications using DCELL range of products
|
- Structural Testing
- Jack Load monitoring
- Cable tension Monitoring
- Material Test Machine
- Feedback Press Load Monitoring
|
|
- SHK-B
- SHK-D
- TEL SHAK-B
- TEL SHAK-D
- More...
SHK-B Bow Type Crosby Cabled Shackle Load Cell |
|
- Ranges 1tonne to 400tonne
- High Tensile Carbon Steel Construction
- Environmentally Sealed to IP66 (IP67 can also be offered)
- Simple installation and operation
- Shackle and load pin fully certified
- Optional load centralizing bobbin
- Can be supplied with amplified output
- Many other options available
The micron range of Shackle Load Cells is designed for lifting and weighing in rugged or harsh environments.
The shackle pins are forged from high tensile carbon steel and are machined to an exacting specification. The basic shackle uses the Crosby G2130 (1-25tonne) and G2140 (40-400tonne).
This range of load cells is Proof Loaded to 150% of the normal rated load.
The SHK-B series are available in a range from 1 tonne to 400 tonne. The integral cable is normally enclosed in an armored rubber hydraulic hose to give physical and environmental protection. The SHK-B is internally gauged and the whole instrumented area is sealed to IP66, to protect it in service.
They are simple to install and are available in standard shackle sizes. As an option, a rotating bobbin can be supplied, to centralize the load and to minimize any point-load effects when the shackle is placed under load. We are always pleased to discuss any special requirements that can be accommodated. The SHK-B series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (tonne) |
1, 2, 3¼, 4¾, 6½, 9½, 12, 17
25, 40, 55, 85, 120, 200, 300, 400 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
1.5 mV/V at Rated Load (nominal) |
| Non-Linearity |
< ±1.0% of Rated Load (typically) |
| Non-Repeatability |
< ±0.10% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350ohm |
| Insulation Resistance |
> 500Mohm @ 500vdc |
| Operating Temperature Range |
-20 to +70°C |
| Compensated Temperature Range |
-10 to +50°C |
| Zero Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Environmental Protection Level |
IP66 (IP67 optional) |
| Connection Type |
10 meter 4-core screened PUR cable (glanded exit) |
| Wiring Connections |
| Red +ve supply Blue -ve supply |
|
| Green +ve signal Yellow -ve signal |
|
| Options Available |
|
Special ranges available
Special electrical connections
Integral signal conditioning
Centralizing Bobbin
Subsea and Offshore versions
Lloyd's, ABS or DNV witness testing |
|
|
SHK-B Data Sheet |
- TR150 Battery Powered Handheld Portable Indicator
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- ADW15 Panel Mounting Load Cell Indicator/Controller
- MAX Modular Expandable Analogue Amplifier System
|
The SHK-B can be offered with the following options
- Optional Centralizing Bobbin
- - see product datasheet for details
- Integral Amplifier, providing direct voltage or current output, using ICA range of products
- Click here to view ICA details
- Integral Amplifier, providing direct RS485 digital communications using DCELL range of products
- Click here to view DCELL details
- Wireless Radio Telemetry Version
- Click here to view details of the TELSHACK-B
|
- Under-hook Hoist/Crane Weighing
- Cable Tension Monitoring
- Towing/Mooring Tension
- Crane Safe Load Monitoring
|
|
SHK-D D Type Crosby Cabled Shackle Load Cell
|
|
- Ranges 1tonne to 35tonne
- High Tensile Carbon Steel Construction
- Environmentally Sealed to IP66 (IP67 can also be offered)
- Simple installation and operation
- Shackle and load pin fully certified
- Optional load centralizing bobbin
- Can be supplied with integral signal conditioning
- Many other options available
The Micron range of Shackle Load Cells is designed for lifting and weighing in rugged or harsh environments.
The shackle pins are forged from high tensile carbon steel and are machined to an exacting specification. The basic shackle uses the Crosby G2150.
This range of load cells is Proof Loaded to 150% of the normal rated load.
The SHK-D series are available in a range from 1 tonne to 35 tonne. The integral cable is normally enclosed in an armored rubber hydraulic hose to give physical and environmental protection. The SHK-D is internally gauged and the whole instrumented area is sealed to IP66, to protect it in service.
They are simple to install and are available in standard shackle sizes. As an option, a rotating bobbin can be supplied, to centralize the load and to minimize any point-load effects when the shackle is placed under load.
We are always pleased to discuss any special requirements that can be accommodated. The SHK-D series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (tonnes) |
1, 2, 3¼, 4¾, 6½, 9½, 12, 15, 25, 35 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
300% of Rated Load |
| Output |
1.5 mV/V at Rated Load (nominal) |
| Non-Linearity |
< ±1.0% of Rated Load (typically) |
| Non-Repeatability |
< ±0.10% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350ohm |
| Insulation Resistance |
> 500Mohm @ 500vdc |
| Operating Temperature Range |
-20 to +70°C |
| Compensated Temperature Range |
-10 to +50°C |
| Zero Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Environmental Protection Level |
IP66 (IP67 optional) |
| Connection Type |
10 meter 4-core screened PUR cable (glanded exit) |
| Wiring Connections |
| Red -ve supply |
Blue -ve supply |
| Green +ve signal |
Yellow -ve signal |
|
| Connection Type |
Special ranges available
Special electrical connections
Integral signal conditioning
Centralizing Bobbin
Subsea and Offshore versions
Lloyd’s, ABS or DNV witness testing |
SHAK-D Data Sheet
- TR150 Battery Powered Handheld Portable Indicator
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- ADW15 Panel Mounting Load Cell Indicator/Controller
- MAX Modular Expandable Analogue Amplifier System
|
The SHK-D can be offered with the following options
- Optional Centralizing Bobbin
- see product datasheet for details
- Integral Amplifier, providing direct voltage or current output, using ICA range of products
- Click here to view ICA details
- Integral Amplifier, providing direct RS485 digital communications using DCELL range of products
- Click here to view DCELL details
- Wireless Radio Telemetry Version
- Click here to view details of the TELSHACK-D
- For other options that may be available, please refer to the SHK-D datasheet or contact our technical department.
|
- Under-hook Hoist/Crane Weighing
- Cable Tension Monitoring
- Towing/Mooring Tension
- Crane Safe Load Monitoring
|
|
TELSHACK-B Wireless Telemetry Crosby Bow Shackle Load Cell |
|
- Ranges 12tonne to 400tonne
- 2.4GHz License Free Frequency
- High Tensile Carbon Steel Construction
- Environmentally Sealed to IP67
- Simple installation and operation
- Continuous use battery life of 200 hours.(batteries are built-in & rechargeable)
- Shackle and load pin fully certified
- Transmission range of up to 120 meters clear line of sight
- Many other telemetry configurations available.
The TELSHACK-B range of wireless telemetry shackle load cells are manufactured using the Crosby G2130 (12-25tonne) and G2140 (40-400tonne). Versions are also available using the popular GreenPinâ„¢ range of shackles. The built in wireless radio telemetry electronics operates on the 2.4GHz license free frequency.
The telemetry housing is manufactured from stainless steel, offering a robust solution. Located in the housing are two AAA NiMh batteries, which can be accessed by removing the telemetry housing cover. No tools are required, making it easy to do on site. The batteries can be recharged using the universal charger supplied. In emergencies (when you do not have time to re-charge the batteries), standard alkaline batteries can also be used.
There is an external sealed aerial, which can be rotated to offer the best signal polarity and hence the best transmission range, making it more versatile for different applications.
The TELSHACK-B is supplied as standard with a handheld battery powered display, or alternatively, for multi-shackle applications, a single display can address up to 12 shackles for individual monitoring, or for summation/balancing applications.
Micron Meter scan also supply more complex wireless telemetry systems. For further information on what we can offer, please contact our Technical Department, with details of your application requirements.
|
|
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (tonne) |
12, 17, 25, 40, 55, 85, 120, 200, 300, 400 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
300% of Rated Load |
| Non-Linearity |
< ±1.0% of Rated Load (typically) |
| Non-Repeatability |
< ±0.10% of Rated Load |
| Transmission Distance |
Up to 120 meters (clear line of sight) |
| Battery Life |
200 hours maximum (continuous use) |
| Battery |
Internal rechargeable NiMh |
| Battery Charging |
Batteries can be removed for recharging |
| Operating Temperature Range |
-20 to +60°C |
| Environmental Protection Level |
IP67 |
| Options Available |
Special ranges available
Centralizing Bobbin
Greenpin ™ shackle version (see separate datasheet)
Special telemetry systems available |
TELSHACK-B Datasheet
For multiple shackle applications, where it is required to read individual shackles, by scrolling through connected shackles, or display summated loads on multiple shackles, the following display is recommended
- T24-HA Wireless Telemetry Advanced Handheld Indicator
- For applications where either single or multiple shackles need to be connected to a printer or a PC, the following product is recommended
- T24-SO Wireless Telemetry Serial Output Module
|
The TELSHACK-B can be offered with the following options
- Optional Centralizing Bobbin
- see product datasheet for details
- Cable Connected Version
- Click SHK-B Tab to view details.
|
- Under-hook Hoist/Crane Weighing
- Cable Tension Mounting
- Towing/Mooring Tension
- Beam Proof loading
|
|
TELSHACK-D Wireless Telemetry Crosby D Shackle Load Cell |
|
- Ranges 12tonne to 35tonne
- 2.4GHz License Free Frequency
- High Tensile Carbon Steel Construction
- Environmentally Sealed to IP67
- Simple installation and operation
- Continuous use battery life of 200 hours.(batteries are built-in & rechargeable)
- Shackle and load pin fully certified
- Transmission range of up to 120 meters clear line of sight
- Many other telemetry configurations available.
The TELSHACK-D range of wireless telemetry shackle load cells are manufactured using Crosby G2150 shackles. Versions are also available using the popular GreenPinâ„¢ range of shackles. The built in wireless radio telemetry electronics operates on the 2.4GHz license free frequency.
The telemetry housing is manufactured from stainless steel, offering a robust solution. Located in the housing are two AAA NiMh batteries, which can be accessed by removing the telemetry housing cover. No tools are required, making it easy to do on site. The batteries can be recharged using the universal charger supplied. In emergencies (when you do not have time to re-charge the batteries), standard alkaline batteries can also be used.
There is an external sealed aerial, which can be rotated to offer the best signal polarity and hence the best transmission range, making it more versatile for different applications.
The TELSHACK-D is supplied as standard with a handheld battery powered display, or alternatively, for multi-shackle applications, a single display can address up to 12 shackles for individual monitoring, or for summation/balancing applications.
Micron Meter scan also supply more complex wireless telemetry systems. For further information on what we can offer, please contact our Technical Department, with details of your application requirements. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (tonne) |
12, 17, 25, 35 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
300% of Rated Load |
| Non-Linearity |
< ±1.0% of Rated Load (typically) |
| Non-Repeatability |
< ±0.10% of Rated Load |
| Transmission Distance |
Up to 120 meters (clear line of sight) |
| Battery Life |
200 hours maximum (continuous use) |
| Battery |
Internal rechargeable NiMh |
| Battery Charging |
Batteries can be removed for recharging |
| Operating Temperature Range |
-20 to +60°C |
| Environmental Protection Level |
IP67 |
| Options Available |
Special ranges available
Centralizing Bobbin
Greenpin™ shackle version (see separate datasheet)
Special telemetry systems available |
TELE-SHACK-D Data Sheet
For multiple shackle applications, where it is required to read individual shackles, by scrolling through connected shackles, or display summated loads on multiple shackles, the following display is recommended
- T24-HA Wireless Telemetry Advanced Handheld Indicator
- For applications where either single or multiple shackles need to be connected to a printer or a PC, the following product is recommended
- T24-SO Wireless Telemetry Serial Output Module
|
The TELSHACK-D can be offered with the following options
- Optional Centralizing Bobbin - see product datasheet for details
- Cable Connected Version - Click SHK-D Tab to view details
|
- Under-hook Hoist/Crane Lifting
- Cable Tension Monitoring
- Towing/Mooring Tension
- Beam proof loading
|
|
- STA-1
- STA-2
- STA-3
- STA-4
- More...
STA-1 Aluminum Alloy S-Type Tension and Compression Load Cell |
|
- Ranges 50, 100, 200, 300kg
- Aluminum alloy construction
- Environmentally sealed to IP66
- Can be supplied complete with mating spherical rod-end bearings
The STA-1 series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearing.
The STA-1 is suitable for many applications where a tension and compression load cell is required, for high accuracy measurements. Applications such as vessel weighing, material test machines and dynamometers are a few examples.
The STA-1 series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (kg) |
50, 100, 200, 300 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
2.0 mV/V at Rated Load (±10%) |
| Accuracy |
< ±0.03% of Rated Load |
| Non-Repeatability |
< ±0.01% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
415ohm |
| Insulation Resistance |
> 500Mohm @ 100vdc |
| Operating Temperature Range |
-20 to +70°C |
| Compensated Temperature Range |
-10 to +40°C |
| Zero Temperature Coefficient |
< ±0.003% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.002% of Rated Load/°C |
| Environmental Protection Level |
IP66 |
| Connection Type |
PVC screened cable 3m long, via cable gland |
| Wiring Connections |
| Red |
+ve supply |
Blue |
-ve supply |
| Blue |
+ve sense |
Yellow |
-ve sense |
|
| Options Available |
Can be supplied with instrumentation
Spherical seating rod end bearings
Compression load button |
STA-1 Data Sheet
- TR150 Battery Powered Handheld Portable Indicator
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- ADW15 Panel Mounting Load Cell Indicator/Controller
- SMW Wall Mounting Load Cell Indicator/Controller
|
| There are currently no options available to view from this page. To view the various options which may be available for the STA-1, please view the STA-1 product datasheet |
- Hanging scales
- Material test machines
- Engine/motor dynamometers
- General force measurement
|
|
STA-2 Stainless Steel S-Type Tension and Compression Load Cell |
|
- Ranges 250, 500, 1000, 2000,5000, 10000, 20000kg
- Stainless steel fully welded construction
- Environmentally sealed to IP68
- Can be supplied complete with mating spherical rod-end bearing
The STA-2 series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearing.
The STA-2 is suitable for many applications where a tension and compression load cell is required, for high accuracy measurements. Applications such as vessel weighing, material test machines and dynamometers area few examples.
The STA-2 series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (kg) |
250, 500, 1000, 2000, 5000, 10000, 20000 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
2.0 mV/V at Rated Load (±0.2%) |
| Accuracy |
< ±0.03% of Rated Load |
| Non-Repeatability |
< ±0.01% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350ohm |
| Insulation Resistance |
> 500Mohm @ 100vdc |
| Operating Temperature Range |
-20 to +70°C |
| Compensated Temperature Range |
-10 to +40°C |
| Zero Temperature Coefficient |
< ±0.002% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.002% of Rated Load/°C |
| Environmental Protection Level |
IP68 |
| Connection Type |
PVC screened cable 3m long, via cable gland |
| Wiring Connections |
| Red |
+ve supply |
Blue |
-ve supply |
| Green |
+ve signal |
Yellow |
-ve sense |
|
| Options Available |
Can be supplied with instrumentation
Spherical seating rod end bearings
Compression load button |
STA-2 Data Sheet
- TR150 Battery Powered Handheld Portable Indicator
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- ADW15 Panel Mounting Load Cell Indicator/Controller
- SMW Wall Mounting Load Cell Indicator/Controller
|
| There are currently no options available to view from this page. To view the various options which may be available for the STA-1, please view the STA-1 product datasheet |
- Vessel weighing
- Hanging scales
- Multipoint structural weighing
- Material/tensile test machines
- General force measurement
|
|
STA-3 Alloy Steel S-Type Tension and Compression Load Cell |
|
- Ranges 50, 100, 200, 300, 500, 1000kg
- Alloy steel nickel plated construction
- Environmentally sealed to IP67
- Can be supplied complete with mating spherical rod-end bearings
The STA-3 series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearing.
The STA-3 is suitable for many applications where a tension and compression load cell is required, in harsh environments. Applications such as vessel weighing, material test machines and dynamometers area few examples.
This range of products is ideally suited for many other OEM applications, offering a highly cost effective solution for a wide variety of applications.
The STA-3 series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (kg) |
50, 100, 200, 300, 500, 1000 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
2 mV/V at Rated Load (±0.1%) |
| Accuracy |
< ±0.02% of Rated Load |
| Non-Repeatability |
< ±0.01% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350ohm |
| Insulation Resistance |
> 500Mohm @ 100vdc |
| Operating Temperature Range |
-30 to +70°C |
| Compensated Temperature Range |
-10 to +40°C |
| Zero Temperature Coefficient |
< ±0.004% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.002% of Rated Load/°C |
| Environmental Protection Level |
IP67 |
| Connection Type |
PVC screened cable 3m long, via cable gland |
| Options Available |
Can be supplied with instrumentation
Spherical Seating Rod-End Bearings
Compression Load Button |
STA-3 Data Sheet
- TR150 Battery Powered Handheld Portable Indicator
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- ADW15 Panel Mounting Load Cell Indicator/Controller
- SMW Wall Mounting Load Cell Indicator/Controller
|
| There are currently no options available to view from this page. To view the various options which may be available for the STA-3, please view the STA-3 product datasheet |
- Hanging scales
- Material test machines
- Engine/motor dynamometers
- General force measurement Process weighing
|
|
STA-4 Alloy Steel S-Type Tension and Compression Load Cell |
|
- Ranges 1500, 2000, 3000, 5000kg
- Alloy steel nickel plated construction
- Environmentally sealed to IP67
- Can be supplied complete with mating spherical rod-end bearings
The STA-4 series load cell is ideal for measuring both tensile and compressive forces. The standard metric threads at each end of the load cell are designed to accept standard spherical seating rod-end bearing.
The STA-4 is suitable for many applications where a tension and compression load cell is required, for high accuracy measurements. Applications such as vessel weighing, material test machines and dynamometers area few examples.
This range of products is ideally suited for many other OEM applications, offering a highly cost effective solution for a wide variety of applications.
The STA-4 series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (kg) |
1500, 2000, 3000, 5000 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
2 mV/V at Rated Load (±0.1%) |
| Accuracy |
< ±0.02% of Rated Load |
| Non-Repeatability |
< ±0.01% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350ohm |
| Insulation Resistance |
> 500Mohm @ 100vdc |
| Operating Temperature Range |
-30 to +70°C |
| Compensated Temperature Range |
-10 to +40°C |
| Zero Temperature Coefficient |
< ±0.004% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.002% of Rated Load/°C |
| Environmental Protection Level |
IP67 |
| Connection Type |
PVC screened cable 3m long, via cable gland |
| Wiring Connections |
| Green |
+ve supply |
Blue |
-ve supply |
| Red |
+ve signal |
White |
-ve signal |
|
| Options Available |
Can be supplied with instrumentation
Spherical seating rod end bearings
Compression load button |
STA-4 Data Sheet
- TR150 Battery Powered Handheld Portable Indicator
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- ADW15 Panel Mounting Load Cell Indicator/Controller
- SMW Wall Mounting Load Cell Indicator/Controller
|
| There are currently no options available to view from this page. To view the various options which may be available for the STA-4, please view the STA-4 product datasheet |
- Hanging scales
- Material test machines
- Engine/motor dynamometers
- General force measurement
- Process weighing
|
|
RILL Radio Telemetry Wireless Link Load Cell
|
|
- Ranges 2.5 to 250 tonne
- Lightweight Aluminum Construction
- Shackle holes are steel bushed
- Environmentally Sealed to IP66
- License Free 2.4GHz radio
- Can be supplied with various bespoke telemetry and/or software packages
The Micron RILL series of wireless link load cells have been designed for lifting and weighing in rugged or harsh environments, being manufactured from high tensile aluminum to minimize weight (has steel bushes to provide added wear protection from shackles etc).
The RILL series are simple to install and are matched to standard shackle sizes. As standard they are supplied with a battery powered handheld indicator, which will display the load in tonne (other measurement units are available - on request).
The handheld indicator is very easy tom operate, with just two buttons. One button turns the unit ON/OFF, the other button toggles between GROSS/NET.
The RILL can be supplied as a simple Link matched with a handheld or as part of a more complex wireless telemetry radio system. Please contact our technical engineers to discuss any specific requirements you may have. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (tonne) |
2.5, 5, 12, 25, 50, 100, 200, 250 |
| Proof Load |
200% of rated load |
| Safety Factor |
500% of rated load (except 100t & 250t - 400%) |
| Display |
7 digit LCD, 9mm high digits |
| Non-Linearity |
< ±0.3% of Rated Load |
| Non-Repeatability |
< ±0.05% of Rated Load |
| Power Supply |
Four AA alkaline batteries (replaceable) for link
Two AA alkaline batteries (replaceable) for display |
| Battery Life |
850 hours continuous use for link
400 hours continuous use for display |
| Transmission Range |
100 meters line of sight |
| Radio Frequency |
2.4GHz |
| Update Rate |
Standard 300mS (100mS can be selected) |
| Operating Temperature Range |
-10 to +50°C |
| Compensated Temperature Range |
-10 to +50°C |
| Zero Temperature Coefficient |
< ±0.020% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.020% of Rated Load/°C |
| Environmental Protection Level |
IP66 |
RLL Data Sheet
RLL Instruction Manual |
There is no suggested instrumentation for this product, as it is a self contained product. We are able to offer various bespoke software for monitoring and control, from a single or multiple RILL's.
Please contact our technical department to discuss your requirements.
There are currently no options available to view from this page. To view the various options which may be available for the RILL, please view the RILL product datasheet.
- Underhook Crane Weighing
- Cable tension monitoring
- Crane/Hoist Proof Loading
- Water Weights filling
- Warehouse despatch weighing
|
|
SILL Self Indicating Link Load Cell
|
|
- Ranges 2.5 tonne to 200 tonne
- Lightweight Aluminum Construction
- Shackle holes are steel bushed
- Environmentally Sealed to IP66
- Audible alarm facility as standard
- Can display as standard in t, kg, lb & kN Selectable by operator
- Remote handheld facility available
- Peak Hold facility
- Can be supplied with various bespoke software packages
The micron SILL series have been designed for lifting and weighing in rugged or harsh environments, being manufactured from high tensile aluminum to minimize weight (has steel bushes to provide added wear protection from shackles etc).
The SILL series are simple to install and are matched to standard shackle sizes. The have a built in display which can be selected by the user to display the applied weight or force in t, kg, lb or kN. There is an in-built audible alarm, which can be set by the operator, to warn when an applied weight/force level is met.
For applications where the operator is unable to read the display, there is a handheld remote available. This remote replicates exactly, all the functionality that is available on the link itself.
Other features that are available include Peak Hold, Gross/Net, Pre-set Tare entry. There is also a RS485 digital output available. Micron Meters can offer a software design facility to design bespoke software to meet any specific application requirements that may be required. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (tonne) |
2.5, 5, 10, 12, 20, 25, 50, 100, 200 |
| Proof Load |
200% of rated load |
| Safety Factor |
500% of rated load (except 100t, 400% & 200t - 350%) |
| Display |
6 digit LCD, 25mm high digits, with unit indication |
| Non-Linearity |
< ±0.2% of Rated Load |
| Non-Repeatability |
< ±0.05% of Rated Load |
| Power Supply |
9 volt PP3 battery (life 50 hours minimum) |
| Operating Temperature Range |
-10 to +60°C |
| Compensated Temperature Range |
-10 to +60°C |
| Zero Temperature Coefficient |
< ±0.020% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.020% of Rated Load/°C |
| Environmental Protection Level |
IP66 |
SLL Data Sheet
SLL Instruction Manual |
There is no suggested instrumentation for this product, as it is a self contained product. We are able to offer various bespoke software for monitoring and control, from a single or multiple SILL's. Please contact our technical department to discuss your requirements
There are currently no options available to view from this page. To view the various options which may be available for the SILL, please view the SILL product datasheet
- Under hook crane weighing
- Crane load testing
- Beam proof testing
- Water bag calibration
- Cable tension measurement
|
|
TOG Stainless Steel Toggle Link Load Cell
|
|
- Ranges 750kg to 9500kg
- Stainless Steel Construction
- Fork/Eye, Eye/Eye or Fork/Fork configuration available
- Environmentally Sealed to IP67 (IP68 can also be offered)
- Many special design options available
- Can be supplied with amplified output
- Can be supplied with integral connector
The micron range of Tension Toggle Load cells have been designed for general use and are particularly suitable for permanent installations where wire loads are being measured.
They are built to exacting standards and are suitable for use in exposed situations and can be supplied to withstand immersion in seawater.
The TOG range can be supplied as shown in this datasheet or can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated.
The TOG series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (Kg) |
750, 1500, 2000, 3250, 4750, 6500, 8500, 9500 |
| Proof Load |
200% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
1.0 mV/V at Rated Load (±10%) |
| Accuracy |
< ±0.20% of Rated Load |
| Non-Repeatability |
< ±0.04% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350Ω |
| Insulation Resistance |
> 500MΩ @ 500vdc |
| Operating Temperature Range |
-20 to +70°C |
| Compensated Temperature Range |
-10 to +50°C |
| Zero Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Environmental Protection Level |
IP67 |
| Connection Type |
5 meters 4-core PUR cable |
| Wiring Connections |
| Red |
+ve supply |
Blue |
-ve supply |
| Green |
+ve signal |
Yellow |
-ve signal |
|
| Options Available |
Special electrical connections
Can be supplied with integral signal conditioning
Special ranges
Consult factory for any other special options |
TOG Data Sheet
- TR150 Battery Powered Handheld Portable Indicator
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- ADW15 Panel Mounting Load Cell Indicator/Controller
- MAX Modular Expandable Analogue Amplifier System
|
There are currently no options available to view from this page. To view the various options which may be available for the TOG, please view the TOG product datasheet
- Structural Testing Mooring/Towing
- Monitoring Wire Rigging
- Tension Monitoring
- Wireline Measurement
- Anchor Line Tension
|
|
TLL Stainless Steel Load Monitoring Link Load Cell
|
|
- Ranges 5tonne to 100tonne
- Stainless Steel construction
- Environmentally Sealed to IP66 (IP67 can also be offered)
- Special Sizes and ranges available
- Higher Range versions available
- Amplified output version available
- Ideally suited to be supplied calibrated with TR150 or TR200 battery powered indicators
The micron series of Load Monitoring Links have been designed for lifting and weighing in rugged or harsh environments, being manufactured from entirely from Stainless Steel.
The TLL series are simple to install and are matched to standard shackle sizes. The links are normally supplied with a MIL specification plug and socket; the whole package is environmentally sealed to IP66.
The TLL series can be supplied as shown in this datasheet or can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated.
The TLL series can be supplied on it's own or combined with our extensive range of instrumentation to provide a complete load monitoring system. |
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Rated Load (tonne) |
5, 10, 20, 25, 30, 40, 50, 100 |
| Proof Load |
150% of Rated Load |
| Ultimate Breaking Load |
> 300% of Rated Load |
| Output |
1.5 mV/V at Rated Load (±10%) |
| Accuracy |
< ±0.25% of Rated Load |
| Non-Repeatability |
< ±0.04% of Rated Load |
| Excitation Voltage |
10vdc recommended, 15vdc maximum |
| Bridge Resistance |
350Ω |
| Insulation Resistance |
> 500MΩ @ 500vdc |
| Operating Temperature Range |
-20 to +70°C |
| Compensated Temperature Range |
-10 to +50°C |
| Zero Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Span Temperature Coefficient |
< ±0.010% of Rated Load/°C |
| Environmental Protection Level |
IP66 (IP67 optional) |
| Connection Type |
5 meters 4-core PUR cable |
| Wiring Connections |
| Red |
+ve supply |
Blue |
-ve supply |
| Green |
+ve signal |
Yellow |
-ve signal |
|
| Options Available |
Special ranges and sizes available
Can be supplied complete with shackles
Can be supplied with integral signal conditioning
Optional complete carry kit, including indicator Special electrical connections |
TLL Data Sheet
- TR150 Battery Powered Handheld Portable Indicator
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- ADW15 Panel Mounting Load Cell Indicator/Controller
- MAX Modular Expandable Analogue Amplifier System
|
The TLL can be offered with the following options
- Integral Amplifier, providing direct voltage or current output, using ICA range of products
- Click here to view ICA details
- Integral Amplifier, providing direct RS485 digital communications using DCELL range of products
- Click here to view DCELL details
|
- Cable Tension Monitoring
- Under-hook Hoist and Crane Weighing
- Towing/Mooring Tension
- Crane Safe Load Monitoring
|
|
UF1 Low Range Isometric Force Sensor |
|
- Ranges 25g (1oz) to 1500g (54oz)
- Low Deflection
- High Output Sensitivity
- High Overload Range
- Versatile signal connection method
- Versatile Mounting Arrangement
The Micron MetersUF1 series force sensors from the range of Pioden Transducers has been widely used in many applications for more than 40 years.
The UF1 has proved the first choice for many applications including muscular and membrane movement monitoring, yarn and fabric tension control, fluid viscosity measurement and even the force induced in butterfly wings during flight.
There are many other applications that the UF1 has been used in. It is most popular in applications where our customers need to measure small forces, with a good level of accuracy, minimal deflection and with a flexible mounting arrangement.
The UF1 can be supplied on it's own or combined with any of Micron Meters wide range of instrumentation products to provide either a simple or more complex monitoring or control system.
|
|
- Specifications
- Dimensions
- Downloads
- Suggested Instrumentation
- Options
- Applications
| Range (FSO) |
25g, 55g, 110g, 220g, 450g, 1000g, 1500g
Equivalent to:- 1oz, 2oz, 4oz, 8oz, 18oz, 36oz, 54oz |
| Maximum Overload Range |
2500g for all ranges |
| Output Sensitivity |
4mV/V nominally |
| Zero Offset |
< ±2% FSO |
| Accuracy |
< ±0.3% FSO |
| Repeatability |
< ±0.1% FSO |
| Excitation Voltage |
10vdc maximum |
| Bridge Resistance |
25g, 55g, 450g:- nominally 725ohm
110g, 220g, 1000g, 1500g:- nominally 1000ohm |
| Insulation Resistance |
> 100Mohm at 50vdc |
| Operating Temperature Range |
-40°C to +80°C |
| Compensated Temperature Range |
+10°C to +60°C |
| Zero Temperature Coefficient |
< ±0.05% FSO/°C |
| Span Temperature Coefficient |
< ±0.05% FSO/°C |
| Environmental Protection Level |
IP51 |
| Deflection |
< ±0.03mm |
| Connection Type |
Via 4off PTFE insulated solder terminals |
UF-1 Data Sheet
- SGA Strain Gauge Analogue Amplifier
- LCA15 Intelligent Strain Gauge Amplifier/Controller
- TR150 Battery Powered Handheld Portable Indicator
- ADW15 Panel Mounting Load Cell Indicator/Controller
|
| There are currently no options available to view from this page. To view the various options which may be available for the UF1, please view the UF1 product datasheet |
- Isometric Force Measurement
- Muscle Contraction Measurement
- Textile Tension Measurement
- Torque Reaction Measurement
|
|
|
|
|
|
