Search:  
Micron Advanced Search Engine
Advanced Search
Search Tips

Micron Tech Support Center

Phone Support
770.923.2522
Email Address

Micron Digital Panel Meter </br> Thermocouple Temperature


Micron Digital Panel Meter </br> Thermocouple Temperature

Previous  Up  Next" 
Micron Digital Panel Meter
Thermocouple Temperature

Product Manual (PDF)


E-mail this product to a friend E-mail this product to a friend

Micron Digital Panel Meter 
Thermocouple Temperature Panel Meter / Controller
High accuracy plus linearized transmitter & control outputs

Key Features
  • Factory calibrated for thermocouple types J, K, T, E, N, R, S
  • Entire range of each thermocouple in one scale
  • Highly accurate and repeatable
  • Selectable 1° or 0.°1, degrees Celsius, Fahrenheit, Kelvin or Rankin
  • Up to 60 conversions per second
  • Peak or valley display
  • Universal AC power, 85-264 Vac
  • NEMA 4X, 1/8 DIN case
Show Me More Info..
Overview Specifications Mechanical





Click on the Radio Buttons Below to Customize your Meter.
Customized Price will be Shown in Summary Box.
Base Price Model Includes: 1//8 DIN Case
Main Board with Green or Red LED'S
85-264 Vac Power Module
Signal Input Module


Main Board with Displays
Using the list below select your display color.
Click Here to learn more about this option.
The Micron thermocouple meter is factory calibrated for type J, K, T, E, N, R and S thermocouples for exceptional accuracy and repeatability. The entire span of each thermocouple type is presented in a single range. The thermocouple type, unit of measure (°C or °F), resolution (1° or 0.1°), and upscale or downscale open sensor indication are selectable from the front panel or via the serial interface. Display in Kelvin or Rankin is selected by offsetting the Celsius or Fahrenheit ranges. Cold junction compensation is standard.
M1 Main Board, Green LEDs
Main Board, Green LEDs

M2 Main Board, Red LEDs [Add $0.00]
Main Board, Red LEDs

Power Module
Using the list below select a Power Option.
Click Here to learn more about this option.
Click on each Item Below to See Images and Additional Info.
High voltage AC or DC power.
The standard Micron supply accepts power from 85-264 Vac, 47-63 Hz. This allows the same meter to operate worldwide without modification. The supply also accepts 90 to 370 Vdc (high voltage DC operation not UL approved).

Low voltage AC or DC power.
An optional low voltage supply operates from 10 to 48 Vdc or 12 to 30 Vac, 47-63 Hz. This supply allows the Micron to be powered from batteries or from 28 Vac, 400 Hz aircraft power
(400 Hz operation not UL approved).
0 Isolated 85-264 Vac
Isolated 85-264 Vac
High voltage AC or DC power.
The standard Micron supply accepts power from 85-264 Vac, 47-63 Hz. This allows the same meter to operate worldwide without modification. The supply also accepts 90 to 370 Vdc (high voltage DC operation not UL approved).

1 Isolated 12-32 Vac or 10-48 Vdc [Add $30.00]
Isolated 12-32 Vac or 10-48 Vdc
Low voltage AC or DC power.
An optional low voltage supply operates from 10 to 48 Vdc or 12 to 30 Vac, 47-63 Hz. This supply allows the Micron to be powered from batteries or from 28 Vac, 400 Hz aircraft power
(400 Hz operation not UL approved).

Relay Output Module
Using the list below select a Relay Output Option.
Click Here to learn more about this option.
Click on each Item Below to See Images and Additional Info.
The contact relays are rated for 8A at 250 Vac or 24 Vdc and are recommended for high currents. The dual contact relays are mutually isolated Form C relays and can be wired to be normally open (NO) or normally closed ($0) when not energized. The quad contact relays are normally open (NO) Form A relays and share a common isolated ground in pairs.

The solid state relays are rated for 130 mA at 250 Vac or 24 Vdc and are recommended for low currents and frequent switching. They are Form A relays, which are normally open (NO) when not energized. As for the contact relays, the dual solid state relays are mutually isolated, and the quad solid state relays share a common isolated ground in pairs.
0 No Relays
No Relays

1 Two 8A Contact Relays [Add $80.00]
Two 8A Contact Relays
The contact relays are rated for 8A at 250 Vac or 24 Vdc and are recommended for high currents. The dual contact relays are mutually isolated Form C relays and can be wired to be normally open (NO) or normally closed when not energized. The quad contact relays are normally open (NO) Form A relays and share a common isolated ground in pairs.

2 Two 130 mA Solid State Relays [Add $55.00]
Two 130 mA Solid State Relays
The solid state relays are rated for 130 mA at 250 Vac or 24 Vdc and are recommended for low currents and frequent switching. They are Form A relays, which are normally open (NO) when not energized. As for the contact relays, the dual solid state relays are mutually isolated, and the quad solid state relays share a common isolated ground in pairs.

3 Four 8A Contact Relays [Add $100.00]
Four 8A Contact Relays
The contact relays are rated for 8A at 250 Vac or 24 Vdc and are recommended for high currents. The dual contact relays are mutually isolated Form C relays and can be wired to be normally open (NO) or normally closed when not energized. The quad contact relays are normally open (NO) Form A relays and share a common isolated ground in pairs.

4 Four 130 mA Solid State Relays [Add $75.00]
Four 130 mA Solid State Relays
The solid state relays are rated for 130 mA at 250 Vac or 24 Vdc and are recommended for low currents and frequent switching. They are Form A relays, which are normally open (NO) when not energized. As for the contact relays, the dual solid state relays are mutually isolated, and the quad solid state relays share a common isolated ground in pairs.

Analog Output Module
Using the list below select a Analog Output Option.
Click Here to learn more about this option.
Click on each Item Below to See Images and Additional Info.
A 16-bit analog output option board can turn a Micron 1/8 DIN digital panel meter, counter, timer or remote display into a superb, isolated, linearized transmitter or signal conditioner with exceptional accuracy and high-speed response. The analog output for thermocouples, RTDs and custom curves is linearized to the displayed reading.

The analog output can be selected as 4-20 mA, 0-20 mA, unipolar 0-10V, or bipolar -10V to +10V with a 20V span. If a voltage output is selected, output pins 1 and 2 may be reversed to provide reversed polarity.

A 16-bit D-to-A converter provides 0.0015% full-scale resolution and ±0.02% full-scale accuracy. The update rate for meters is a fast 60/sec for 60 Hz power or 50/sec at 50 Hz power. The analog output can track the unfiltered signal for fastest response, or a digitally filtered signal for best noise rejection.
0 No Analog Output
No Analog Output

1 Isolated 4-20 mA, 0-20 mA, 0-10 V, -10 to +10V [Add $90.00]
Isolated 4-20 mA, 0-20 mA, 0-10 V, -10 to +10V
A 16-bit analog output option board can turn a Micron 1/8 DIN digital panel meter, counter, timer or remote display into a superb, isolated, linearized transmitter or signal conditioner with exceptional accuracy and high-speed response. The analog output for thermocouples, RTDs and custom curves is linearized to the displayed reading.

The analog output can be selected as 4-20 mA, 0-20 mA, unipolar 0-10V, or bipolar -10V to +10V with a 20V span. If a voltage output is selected, output pins 1 and 2 may be reversed to provide reversed polarity.

A 16-bit D-to-A converter provides 0.0015% full-scale resolution and ±0.02% full-scale accuracy. The update rate for meters is a fast 60/sec for 60 Hz power or 50/sec at 50 Hz power. The analog output can track the unfiltered signal for fastest response, or a digitally filtered signal for best noise rejection.

Digital Interface Module
Using the list below select a Digital Interface Option.
Click Here to learn more about this option.
Click on each Item Below to See Images and Additional Info.
RS232 interface board
Single RJ11 connector for point-to-point data communications to a PC RS232 COM port. Compatible with 4- or 6-wire data cables.

RS485 interface board
Dual RJ11 connectors for RS485 daisy-chaining without a hub. Jumper selectable 2-wire (half duplex) or 4-wire (full duplex) connection. RJ11 connectors allow use of readily-available 6-wire data cables.

RS485 Modbus interface board
Dual RJ45 connectors for RS485 daisy-chaining without a hub. Jumper selectable 2-wire (half duplex) or 4-wire (full duplex) connection. RJ45 connectors conform to Modbus standard.

USB 2.0 interface board
Single USB Type-B receptacle for USB 2.0 I/O. Allows plug-and-pay connection of meter to a PC with a USB port.

USB 2.0-to-RS485 converter board
Includes a USB Type-B receptacle for USB 2.0 I/O plus an RJ11 connector for RS485. Allows meter to communicate with a PC via USB while also serving as a USB-to-RS485 converter and server to a 31-device RS485 network.

Ethernet interface boards
RJ45 connector to an Ethernet LAN. Node Manager software makes meter discovery and Ethernet setup easy.

RS485 interface board
Dual RJ11 connectors for RS485 daisy-chaining without a hub. Jumper selectable 2-wire (half duplex) or 4-wire (full duplex) connection. RJ11 connectors allow use of readily-available 6-wire data cables.
0 No Digital Interface
No Digital Interface

1 RS232 [Add $60.00]
RS232 interface board
Single RJ11 connector for point-to-point data communications to a PC RS232 COM port. Compatible with 4- or 6-wire data cables.

2 RS485(dual RJ11 connectors) [Add $80.00]
RS485 interface board
Dual RJ11 connectors for RS485 daisy-chaining without a hub. Jumper selectable 2-wire (half duplex) or 4-wire (full duplex) connection. RJ11 connectors allow use of readily-available 6-wire data cables.

4 RS485 Modbus (dual RJ45 connectors) [Add $90.00]
RS485 Modbus interface board
Dual RJ45 connectors for RS485 daisy-chaining without a hub. Jumper selectable 2-wire (half duplex) or 4-wire (full duplex) connection. RJ45 connectors conform to Modbus standard.

5 USB [Add $60.00]
USB 2.0 interface board
Single USB Type-B receptacle for USB 2.0 I/O. Allows plug-and-pay connection of meter to a PC with a USB port.

6 USB-to-RS485 device server [Add $100.00]
USB 2.0-to-RS485 converter board
Includes a USB Type-B receptacle for USB 2.0 I/O plus an RJ11 connector for RS485. Allows meter to communicate with a PC via USB while also serving as a USB-to-RS485 converter and server to a 31-device RS485 network.

7 Ethernet [Add $120.00]
Ethernet interface boards
RJ45 connector to an Ethernet LAN. Node Manager software makes meter discovery and Ethernet setup easy.

8 Ethernet-to-RS485 device server [Add $150.00]
RS485 interface board
Dual RJ11 connectors for RS485 daisy-chaining without a hub. Jumper selectable 2-wire (half duplex) or 4-wire (full duplex) connection. RJ11 connectors allow use of readily-available 6-wire data cables.

Signal Input Module
Using the list below select only one Signal Input Option.
Click Here to learn more about this option.
Click on each Item Below to See Images and Additional Info.
Thermocouple Type
JC Thermocouple Type J, -210°C to 760°C
Thermocouple Type J, -210°C to 760°C

JF Thermocouple Type J, -347°F to 1400°F [Add $0.00]
Thermocouple Type J, -347°F to 1400°F

KC Thermocouple Type K, -347°C to 1372°C [Add $0.00]
Thermocouple Type K, -347°C to 1372°C

KF Thermocouple Type K, -408°F to 2501°F [Add $0.00]
Thermocouple Type K, -408°F to 2501°F

TC Thermocouple Type T, -257°C to 400°C [Add $0.00]
Thermocouple Type T, -257°C to 400°C

TF Thermocouple Type T, -430°F to 752°F [Add $0.00]
Thermocouple Type T, -430°F to 752°F

EC Thermocouple Type E, -240°C to 1000° [Add $0.00]
Thermocouple Type E, -240°C to 1000°

EF Thermocouple Type E, -400°F to 1830°F [Add $0.00]
Thermocouple Type E, -400°F to 1830°F

EC Thermocouple Type N, -245°C to 1300°C [Add $0.00]
Thermocouple Type N, -245°C to 1300°C

NF Thermocouple Type N, -410°F to 2370°F [Add $0.00]
Thermocouple Type N, -410°F to 2370°F

SC Thermocouple Type S, -46°C to 1768°C [Add $0.00]
Thermocouple Type S, -46°C to 1768°C

SF Thermocouple Type S, -51°F to 3214°F [Add $0.00]
Thermocouple Type S, -51°F to 3214°F

RC Thermocouple Type R, -45°C to 1768°C [Add $0.00]
Thermocouple Type R, -45°C to 1768°C

RF Thermocouple Type R, -49°F to 3213°F [Add $0.00]
Thermocouple Type R, -49°F to 3213°F

Add-On Options
Optional Items for Micron Digital Panel Meter
BL Blank Lens without Button Pads [Add $0.00]
Blank Lens without Button Pads

CBL01 RJ11-to-DB9 Cable [Add $19.00]
RJ11-to-DB9 Cable

CBL02 USB-to-DB9 Adapter [Add $39.00]
USB-to-DB9 Adapter

CBL05 USB Cable, A to B [Add $15.00]
USB Cable, A to B

IPC Splash-proof Cover [Add $40.00]
Splash-proof Cover

BOX1 NEMA-4 Enclosure [Add $140.00]
NEMA-4 Enclosure

BOX2 NEMA-4 Enclosure plus IPC [Add $180.00]
NEMA-4 Enclosure plus IPC

Summary
Base Price: $218.50
Customized Price: $218.50
Quantity:


  • M1 Main Board, Green LEDs
  • 0 Isolated 85-264 Vac
  • 0 No Relays
  • 0 No Analog Output
  • 0 No Digital Interface
  • JC Thermocouple Type J, -210°C to 760°C

Online Payment Service