RESOURCE CENTER
Data Sheets
Product Announcements
Corporate Home Page

Made in the U.S.A.Din Rail Transmitters

Made in the U.S.A.
Tools Request Product or Service Information Download Datasheet (acrobat pdf) Print This Page Email this Page to a Friend Magnify Primary Image Buy On-Line Now!  
DIN Rail Transmitters

DIN RAIL TRANSMITTERSMicron DIN rail transmitters are available for a wide range of physical parameters and duplicate the high performance (high accuracy, high read rate) and extensive programmable features of 1/8 DIN Micron digital panel meters, counters and timers. They utilize the same signal conditioners, much of the same firmware, and the same Windows-based instrument setup software, but come in a DIN rail mount package that is only 22.5 mm wide. Standard features include serial communications (isolated), a 16-bit analog output (isolated), a transducer excitation output (isolated), and dual solid state relays for alarm or control.

Click on Links for Detailed Product Information


The transmitters are available in Three Types:

LTA Series 4-20 mA, 0-20 mA & 0-10V

LTA Series 4-20mAAnalog Output DIN Rail Transmitters DIN Rail mounted, digitally programmable.
Exceptional accuracy at high update rates.
Read More...

4-20 mA Output
Transmitters by Input Signal
Click on the links below for transmitter descriptions and specifications by type of input signal. Each of the Micron transmitters listed also has a Micron digital panel meter counterpart with the same signal conditioner.

Analog Input Transmitters , 4-20 mA or 0-10V Output
• DC voltage or current
• AC rms voltage or current
• Process signal (wide range of DC voltage or current signals)
• Process signal totalizer (for 0-1 mA, 4-20 mA or 0-10V signals)
• Strain gauge & potentiometer (full scale ranges down to ±200 mV)
• Load cell & microvolt (full scale ranges down to ±20 mV)
• Temperature (ultra-linear output for 7 thermocouple types and 2 RTD types)
Pulse Input Transmitters, 4-20 mA or 0-10V Output
• Dual Channel Frequency (for frequency, rate, or period)
• Dual Channel Pulse Input Totalizer (Rate or total. Selectable square root extraction)
• Arithmetic Functions (applied to rate or total w/ 2 channels: A+B, A-B, AxB, A/B, A/B-1)
• Duty Cycle (transmits ON or OFF period in percent of total period)
• Stopwatch (timing for single events or accumulated events)
• Time Interval (average time of periodic events)
• Phase Angle (for angular phase offset in degrees of AC waveforms)
• Quadrature (position or rate from quadrature encoder signals)
LTM Series Micron Modbus & Serial I/O Transmitters

ModBus and SerialRS232, RS485 (half or full duplex), and Micron ASCII or Modbus protocols are user selectable.
Read More...

Click on the links below for transmitter descriptions and specifications by signal type. Each of the Micron transmitters listed also has a Micron digital panel meter counterpart with the same signal conditioner.
Analog Input Transmitters, Modbus or Micron ASCII I/O:
• DC voltage or current.
• AC rms voltage or current.
• Process signal (wide range of DC voltage or current signals)
• Process signal totalizer (for 0-1 mA, 4-20 mA or 0-10V signals)
• Strain gauge & potentiometer (full scale ranges down to ±200 mV)
• Load cell & microvolt (full scale ranges down to ±20 mV)
• Temperature (ultra-linear output for 7 thermocouple types and 2 RTD types).
Pulse Input Transmitters, Modbus or Micron ASCII I/O
• Dual Channel Frequency (for frequency, rate, or period)
• Dual Channel Pulse Input Totalizer (Rate or total. Selectable square root extraction)
• Arithmetic Functions (Rate or Total w/ 2 Input Channels A & B: A+B, A-B, AxB, A/B, A/B-1)
• Duty Cycle (transmits ON or OFF period in percent of total period)
• Stopwatch (timing for single events or accumulated events)
• Time Interval (average time of periodic events)
• Phase Angle (for angular phase offset in degrees of AC waveforms)
• Quadrature (position or rate from quadrature encoder signals)
 
Serial Input Transmitter, 4-20 mA or 0-10V Output