DATA SHEETS
 
 
 
 

Pressure Transducer MP502A-100G Thread Mount

 




Product ID:  MP502A-100G
Price: $281.00
Clearance Price: $231.00
(Savings: $50.00)
In Stock!
Email Friend
Order Options:
Qty:
Add To Cart
Add To Saved Cart

The Model MP502 is a miniature, low cost, general use pressure sensor that automatically compensates for line resistance and power supply changes. This transducer is made of corrosive resistant titanium (6AL4V) and utilizes high reliability  semiconductor strain gages bonded directly to the inside surface of the machined diaphragm.
Pressure on the diaphragm is applied through the hole in the 10-32 threaded nose which is converted to a signal directly proportional to the pressure.
Applications
  • TEST & MEASUREMENT EQUIPMENT
  • PRODUCTION EQUIPMENT & CONTROLS
  • ENERGY CONTROLS
  • LABORATORY INSTRUMENTS & EQUIPMENT
  • LIQUID LEVEL
  • CALIBRATION EQUIPMENT
 

Tech Note
This Pressure Transducer Utilizes
High Quality Semiconductor Strain Gages
See Recommended Items Below.


Datasheet
PERFORMANCE OPTIONS (ALL VALUES MAXIMUM)
 A SpecUnits
Balance (Zero) 4.00±0.50 mA
Full Scale Sensitivity 16.00±0.50 mA
Static Error Band ±0.50 %FS *BFSL
Thermal Balance (Zero) Shift ±0.02 %FS/°F
Thermal Sensitivity Shift ±0.02 %FS/°F
Long Term Stability ±2.00 %FS/year
MECHANICAL
Pressure Ranges 100 PSI
Over Pressure (No change out of spec.) 2.0x Range
Usable Pressure (Small change in balance) 3.0x Range
Burst Pressure 6.0x Range
ENVIRONMENTAL
Storage and Operating Temperature 0° to 180°F
Compensated Temperature Range 30° to 130°F
Acceleration
(Consult factory for high vibration options)
100g's any axis
Media Compatibility (wetted surface) Liquids & Gases compatible with Titanium 6AL4V
Other Temperature Compensated Ranges Consult Factory
ELECTRICAL
Input Voltage (Standard) 24 VDC
Input Load Resistance (Standard) 500 Ohms
Maximum Input Voltage 30 V for short periods
Insulation Resistance Minimum 50 MOhms @ 50 VDC
 Recommended Items:
Page: 1 of 1 
1