|
|
|
|
|
|
Data Logger Services
 |
Gemini - Tinytag Calibration Services
N.I.S.T. and U.K.A.S. Traceable Calibration Certificates for Tinytag data
loggers and data recorders.
Micron Meters s can provide Traceable Calibration Certificates
for Temperature, Humidity,
Voltage and Current
data loggers.
Calibration certificates can be supplied either at the
point-of-purchase, Initial calibration or, if units are returned, for a
Service calibration. |
|
Tinytag Initial Calibration
Calibrate your temperature and humidity loggers at
Time of Purchase.
Standard calibration points.
Calibration certificates for temperature and humidity data loggers are
issued at the following two points unless otherwise specified:
Temperature: 0 and 30°C
Humidity: 20 to 80 % RH (at 25°C)
Additional / alternate calibration points.
Alternate or additional points may be specified within the following
limits:
Temperature: -20 to +150 °C
Humidity: 20 to 90 % RH (at 25°C)
Order codes and pricing are as follows.
Initial calibrations must be specified on a purchase order or included
on your web order.
Click Number to
Purchase.
CAL-9000 initial calibration (single channel data Logger): $100.00
CAL-9003 initial calibration (dual channel data logger): $120.00
Please click here to find out about a service calibration for your
existing temperature and humidity data loggers.
If you should have any questions about data logger calibrations please
contact Micron Meters. |
|
Tinytag Service Calibration
Returning your temperature and humidity data loggers for a service
calibration.
For additional details on returning data loggers for calibration, please
contact Micron Meters.
Customers who have purchased data loggers directly from
Micron Meters should return them with a completed copy of our
Product returns form to:
Micron Meters
677 N. 3050 E. Suite 4
Saint George, Utah 84790
Product Returns Calibration Form U.S.A
Data loggers that are returned for a service calibration will also have
their battery and any seals or desiccant packs replaced.
Standard calibration points.
Calibration certificates for temperature and humidity data loggers are
issued at the following two points unless otherwise specified:
Temperature: 0 and 30°C
Humidity: 20 to 80 % RH (at 25°C)
Additional / alternate calibration points.
Alternate or additional points may be specified within the following
limits:
Temperature: -20 to +150 °C
Humidity: 20 to 90 % RH (at 25°C)
Order codes and pricing are as follows.
Service calibrations should be sent with a purchase order covering the
cost of both the calibration and the return shipping.
CAL-9002 service calibration (single channel data Logger): $100.00
CAL-9004 service calibration (dual channel data logger): $120.00
* Please Note:
Return Shipping Costs for a service calibration required to go back to the U.K. will be
calculated and added to the above service costs.
The shipping cost are available upon request.
* Please Note: We cannot guarantee to calibrate data loggers with a
serial number below 100,000. |
Further information.
If you should have any questions about data logger calibrations please
contact Micron Meters. |
|
|
|